Project: SpiritOfMudsuck   -  
            Listing of Entries
    (Please mouse-over any icon to get a description of that function).



Categories
  
Builder Name:Pete Dailey   -  
Project:   Sonex - Xenos-B Motorglider   -   VIEW REPORTS
Total Hours:1506.3
Total Flight Time:
Total Expense:$75148.03
Start/Last Date:Jul 01, 2016 - No Finish Date
Engine:Aerovee 2.1 Turbo
Propeller:Sensenich
Panel:MGL Avionics Explorer iEFIS/ECB/RDAC
 
Friendly URL: https://eaabuilderslog.org?s=SpiritOfMudsuck

Home or Last Project Picture

Aug 04, 2019     Add ECB CAN bus - (1.6 hours) Category: Avionics
Built cable to add the ECB to the EFIS/iBox CAN bus. Took several tries setting the ECB DIP switches to set profile 31, permitting circuit breaker programming through the MGL EFIS. EFIS/iBox/ECB. Testing of power input from Power Conditioner appeared to blow 5 amp fuses ahead of the iBox. Tested MGL wiring harness for shorts but nothing evident. ECB
When the EFIS is powered through an ECB, switching off the EFIS then requires cycling main power to ECB to re-enable EFIS (circuit programmed to ON during power up.
The current display through the ECB circuits is done in the Simulator selecting ECB tab and providing an ECB circuit number.
 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.